ESC HOT ROLLED U SHEET PILES
Inventory - Readily Available in Indonesia
U PROFILE SHEET PILES
The Hot Rolled U Sheet Pile was produced over 90 years ago and millions of tons of it have been used globally. The thicker rolled flange and interlock design enable multiple reusage making Hot Rolled U Sheet Piles a common choice for temporary works. Utilising various profile and interlock designs, ESC is able to offer stock and made-to-order Hot Rolled U Sheet Piles available from various countries in the world. With stock available in ESC facilities in China and UAE ESC is able to respond to urgent customer requests in a timely fashion at competitive prices.
Suitable Applications
ESC Hot Rolled U Sheet Piles - can be used for a multitude of applications and configurations such as:
-
Revetment works
-
Temporary & Permanent Retaining Wall
-
Flood Levees
-
Cutoff Wall
-
Quay Walls for Ports
-
Embankments
-
Breakwaters
-
Cofferdams
-
& More
Also commonly known as FSP II, FSP III, FSP IV, FSP 2, FSP 3, FSP 4
Section Modulus Range
874-3820cm3/m
Width Range (single)
400-600mm
Thickness Range
10.3-27.6mm
Production Standards
BS EN 10249 Part 1 & 2
Steel Grades
-
SY295, SY390 & S355GP for Type II to Type VIL
Length
27.0m maximum
Standard Stock Lengths of 6m, 9m, 12m, 15m
Delivery Options
-
Single or Pairs
-
Pairs either loose, welded or crimped
-
Lifting Hole
-
By container (11.8m or less) or Break Bulk
-
Corrosion Protection Coatings
Corner Piles
Box Piles can be fabricated out of individual U sections to boost the Moment Capacity of the wall without changing the pile profile. Corners and junctions can be implemented using either a welded interlock or slicing a profile and welding it to the end profile.